How to Root Galaxy S4 I9500 on Android 4.2.2 XXUAMDL Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 I9500 on Android 4.2.2 XXUAMDL Jelly Bean Firmware

Samsung has released its latest Android 4.2.2 Jelly Bean firmware update with base firmware XXUAMDL on the Exynos 5 octa-core variant of Samsung Galaxy S4 bearing model number GT-I9500. The official firmware is now available for download in select Southeast Asia countries as an Over-The-Air (OTA) update as well as via Samsung KIES.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XXUAMDL Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S4 I9500 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The stock recovery package works only on Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUAMDE Jelly Bean. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by selecting Settings >> About Phone.

Steps to root Galaxy S4 I9500 on Android 4.2.2 XXUAMDL Jelly Bean Firmware
Step 1: Download the SamsungI9500_cwm_Recovery_by cofface_0503.zip file for Samsung Galaxy S4 to the computer and extract using winrar/7zip/winzip or any other extracting tool.
Step 2: Download Odin 3.07 and extract the zip file
Step 3: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode
Step 4: Launch Odin on the computer.
Step 5: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 6: In Odin, click the PDA button and select the cofface_samsungI9500_recovery_en_0503.tar file
Step 7: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. DO NOT Tick "Re-partition" options.
Step 8: Finally hit the Start button in Odin to begin the flashing. The installation will take some time
Step 9: When the installation process is completed the phone will restart automatically. Once the home screen appears on the phone users may safely unplug the device from the computer
Step 10: Switch off the Galaxy S4. Then boot the phone into recovery mode by pressing and holding Volume Up, Home and Power buttons together and select ROOT YOUR PHONE.
Step 11: Once rooting process is completed, return to main recovery menu and select reboot system now to reboot phone.

Samsung Galaxy S4 I9500 running on official Android 4.2.2 XXUAMDL Jelly Bean is now rooted successfully. You can now install any app that requires root permission.

[Note: If this method doesn't work try Adam Kernel (including AutoRoot with SuperSU v1.25) or Chainfire's CF-Auto-Root methods.]

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy S4 I9500 on Android 4.2.2 XXUAMDL Jelly Bean Firmware Article

How to Root Galaxy Grand Duos I9082 on Android 4.1.2 XXAMCE Jelly Bean Firmware

Are You Looking For How to Root Galaxy Grand Duos I9082 on Android 4.1.2 XXAMCE Jelly Bean Firmware

Samsung recently released its official Android 4.1.2 Jelly Bean update with firmware build number I9082XXAMCE for Galaxy Grand Duos bearing model number GT-I9082. The firmware is now available for download via Samsung KIES as well as Over-The-Air (OTA) in Southeast Asia regions.

Samsung Galaxy Grand Duos I9082 users who have already updated their devices with Android 4.1.2 XXAMCE Jelly Bean firmware, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Driver for Samsung Galaxy Grand Duos on your computer.
2. Enable USB Debugging Mode. [Press Menu >> Settings >> Applications. From there navigate and tap on Development option and ensure the USB Debugging is turned on.]
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Recovery file and the SuperSU files used for rooting are compatible only with the Samsung Galaxy Grand Duos I9082. Applying theses on any incorrect variant will brick the device. Verify the model number of the Galaxy Grand Duos by selecting Settings >> About Phone.

File Required
1. Odin3_v3.07.rar
2. CWM-touch_i9082_chotu.tar.zip
3. Fix-Recovery.zip
4. UPDATE-SuperSU-v1.25.zip

Steps to Install CWM Recovery on Samsung Galaxy Grand Duos I9082
Step 1: Extract Odin3_v3.07.rar and CWM-touch_i9082_chotu.tar.zip files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy Fix-Recovery.zip and UPDATE-SuperSU-v1.25.zip files to external SD card of phone.
Step 3: Switch off the Galaxy Grand Duos. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on your computer.
Step 5: Connect the phone to the computer using the USB cable while the device is in the Download Mode. A message saying Added will arrive under Odin's message box in the bottom left. You will also get to see COM port with a number in Yellow when the phone is connected to the computer successfully.
Step 6: In Odin, click the PDA and select the CWM-touch_i9082_chotu.tar.md5 file. Also, ensure the Auto-Reboot and Re-Partition options in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once installation is completed, switch off the phone manually (Take out the battery). Then unplug the USB cable to disconnect it from computer.

Steps to Root Galaxy Grand Duos I9082 by Installing SuperSU via CWM Recovery
Step 9: Boot the phone into CWM Recovery by pressing and holding Volume Up + Home buttons together and then press the Power button until the device turns on.
Note: This should boot in CWM Recovery if you manually switch off the phone in Step-8.
Step 10: Now select install zip from sdcard, select choose zip from sdcard and then navigate to the Fix-Recovery.zip file. Select and confirm installation by selecting Yes.
Step 11: Return to main recovery menu and repeat Step 10 but this time choose UPDATE-SuperSU-v1.25.zip file.
Step 12: Once installation process is completed, return to main recovery menu and select reboot system now to reboot phone.

The Samsung Galaxy Grand Duos I9082, running official Android 4.1.2 XXAMCE Jelly Bean, is now rooted successfully.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy Grand Duos I9082 on Android 4.1.2 XXAMCE Jelly Bean Firmware Article

How to Root Galaxy Note 2 N7100 on Android 4.1.2 XXDME1 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Note 2 N7100 on Android 4.1.2 XXDME1 Jelly Bean Firmware

Samsung Galaxy Note 2 N7100 users who have already updated their devices with Android 4.1.2 XXDME1 Jelly Bean firmware, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 2 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 2 N7100. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Note 2 N7100  (CF-Auto-Root-t03g-t03gxx-gtn7100.zip)
2. Odin 3.07

Steps to Root Galaxy Note 2 N7100 on Android 4.1.2 XXDME1 Jelly Bean Firmware
Step 1: Extract downloaded CF-Auto-Root zip file and you will find a .tar.md5 file within it.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 7: Select these files in Odin at respective buttons:

• Click the PDA Button, and select CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the flashing process.
Step 10: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Your Samsung Galaxy Note 2 N7100 running on Android 4.1.2 XXDME1 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developer original thread.

Thanks for Read How to Root Galaxy Note 2 N7100 on Android 4.1.2 XXDME1 Jelly Bean Firmware Article

How to Root Galaxy Note 8.0 N5100 on Android 4.1.2 XXBMD1 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Note 8.0 N5100 on Android 4.1.2 XXBMD1 Jelly Bean Firmware

An Official Android 4.1.2 Jelly Bean Over-The-Air (OTA) update with base firmware XXBMD1 has been released for the international version of Samsung Galaxy Note 8.0 bearing model number GT-N5100.

Samsung Galaxy Note 8.0 N5100 users who have already updated their devices with Android 4.1.2 XXBMD1 Jelly Bean firmware, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 8.0 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 8.0 N5100. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root  for Galaxy Note 8.0 N5100 (CF-Auto-Root-kona3g-kona3gxx-gtn5100.zip)
2. Odin 3.07

Steps to Root Galaxy Note 8.0 N5100 on Android 4.1.2 XXBMD1 Jelly Bean Firmware
Step 1: Extract downloaded CF-Auto-Root zip file and you will find a .tar.md5 file within it.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 7: Select these files in Odin at respective buttons:

• Click the PDA Button, and select CF-Auto-Root-kona3g-kona3gxx-gtn5100.tar.md5.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the flashing process.
Step 10: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Your Samsung Galaxy Note 8.0 N5100 running on Android 4.1.2 XXBMD1 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Note: Tested working on Galaxy Note 8.0 N5100 with Android 4.1.2 XXBMD1 Jelly Bean firmware, should work with other Jelly Bean firmware.

Screenshot 1: Flashing CF-Auto-Root via Odin

Screenshot 2: Rooted!

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy Note 8.0 N5100 on Android 4.1.2 XXBMD1 Jelly Bean Firmware Article

How to Root Galaxy Tab 7.7 P6800 on Android 4.1.2 DXMD3 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Tab 7.7 P6800 on Android 4.1.2 DXMD3 Jelly Bean Firmware

Samsung recently rolled out its first official Android 4.1.2 Jelly Bean update with base firmware DXMD3 for Galaxy Tab 7.7 GT-P6800 in several countries. The official firmware is now available for download via Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Tab 7.7 P6800 users who have already updated their devices with Android 4.1.2 DXMD3 Jelly Bean firmware, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Driver for Samsung Galaxy Tab 7.7 on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 7.7 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CWM Recovery and SuperSU files used for rooting are compatible only with the Samsung Galaxy Tab 7.7 P6800 running on Android 4.1.2 DXMD3 Jelly Bean. Applying these on any incorrect variant will brick the device. Verify the model number of the Galaxy Tab 7.7 by selecting Settings >> About Phone.

File Required
1. Odin3_v3.07.rar
2. cwm-6.0.3.0-p6800.tar
3. UPDATE-SuperSU-v1.25.zip or the latest UPDATE-SuperSU-v1.32.zip

Steps to Install CWM Recovery on Samsung Galaxy Tab 7.7 P6800
Step 1: Extract Odin3_v3.07.rar file using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy UPDATE-SuperSU-v1.25.zip file to external SD card of tablet.
Step 3: Switch off the Galaxy Tab 7.7. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will arrive, then press Volume Up button to enter into Download Mode.
Step 4: Run Odin on your computer.
Step 5: Connect the tablet to the computer using the USB cable while the device is in the Download Mode. A message saying Added will arrive under Odin's message box in the bottom left. You will also get to see COM port with a number in Yellow when the tablet is connected to the computer successfully.
Step 6: In Odin, click the PDA and select the cwm-6.0.3.0-p6800.tar file. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once installation is completed, the tablet will reboot automatically. After the home screen appears, unplug USB cable from the tablet to disconnect it from the computer.

Steps to root Galaxy Tab 7.7 P6800 by Installing SuperSU via CWM Recovery
Step 9: Reboot the Galaxy Tab 7.7 into CWM Recovery Mode by pressing and holding the Volume Up and Power buttons together.
Step 10: Now select install zip from sdcard, select choose zip from external sdcard and then navigate to the UPDATE-SuperSU-v1.25.zip file. Select and confirm installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select reboot system now to reboot tablet.

The Samsung Galaxy Tab 7.7 P6800 running on Android 4.1.2 DXMD3 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

[Note: Tested working on Galaxy Tab 7.7 P6800 with Android 4.1.2 DXMD3 Jelly Bean firmware, should work with other Jelly Bean firmware. Try it and let us know.]

Screenshot 1: Installing CWM Recovery using Odin

Screenshot 2: Installing SuperSU via CWM Recovery

Screenshot 3: Rooted

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers. All credit goes to CWM Recovery and SuperSU original thread.

Click here to know How to Update Galaxy Tab 7.7 P6800 with Android 4.1.2 DXMD3 Jelly Bean official firmware.

Thanks for Read How to Root Galaxy Tab 7.7 P6800 on Android 4.1.2 DXMD3 Jelly Bean Firmware Article

How to Root Galaxy Tab 7.0 Plus P6200 on Android 4.1.2 XXMD6 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Tab 7.0 Plus P6200 on Android 4.1.2 XXMD6 Jelly Bean Firmware

Samsung recently started rolling out its first official Android 4.1.2 Jelly Bean update with base firmware XXMD6 for the Galaxy Tab 7.0 Plus with model number GT-P6200 in several countries. The new official firmware is now available for download through Samsung KIES as well as Over-The-Air (OTA) update in Southeast Asia countries - Indonesia, Malaysia, Philippines, Singapore, Vietnam, and Thailand.

Samsung Galaxy Tab 7.0 Plus P6200 users who have already updated their devices with Android 4.1.2 XXMD6 Jelly Bean firmware, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Driver for Samsung Galaxy Tab 7.0 Plus on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 7.0 Plus should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Recovery and Superuser files used for rooting are compatible only with the Samsung Galaxy Tab 7.0 Plus P6200 running on Android 4.1.2 XXMD6 Jelly Bean. Applying these on any incorrect variant will brick the device.

File Required
1. Odin3_v3.07.rar
2. recovery.tar.rar
3. Superuser-3.1.3-arm-signed.zip

Steps to Install CWM Recovery on Samsung Galaxy Tab 7.0 Plus P6200
Step 1: Extract Odin3_v3.07.rar and recovery.tar.rar files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy Superuser-3.1.3-arm-signed.zip file to external SD card of tablet.
Step 3: Switch off the Galaxy Tab 7.0 Plus. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will arrive, then press Volume Up button to enter into Download Mode.
Step 4: Run Odin on your computer.
Step 5: Connect the tablet to the computer using the USB cable while the device is in the Download Mode. A message saying Added will arrive under Odin's message box in the bottom left. You will also get to see COM port with a number in Yellow when the tablet is connected to the computer successfully.
Step 6: In Odin, click the PDA and select the recovery.tar.md5 file. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once installation is completed, the tablet will reboot automatically. After the home screen appears, unplug USB cable from the tablet to disconnect it from the computer.

Steps to root Galaxy Tab 7.0 Plus P6200 by Installing Superuser via CWM Recovery
Step 9: Reboot the Galaxy Tab 7.0 Plus into Recovery Mode by pressing and holding the Volume Up and Power buttons together.
Step 10: Now select install zip from sdcard, select choose zip from external sdcard and then navigate to the Superuser-3.1.3-arm-signed.zip file. Select and confirm installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select reboot system now to reboot tablet.

[Note: You can replace Superuser with SuperSU if you think the latter is the better one.]

The Samsung Galaxy Tab 7.0 Plus P6200 running on Android 4.1.2 XXMD6 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy Tab 7.0 Plus P6200 on Android 4.1.2 XXMD6 Jelly Bean Firmware Article

How to Root Galaxy S4 I9500 by Installing Adam Kernel

Are You Looking For How to Root Galaxy S4 I9500 by Installing Adam Kernel

Adam Kernel's Features:

• Built from Samsung sources Update1
• Init.d support
• Busybox
• Built with Stock ARM Toolchain 4.6
• AutoRoot with SuperSU v1.25
• CIFS and EFS built as modules (Stored on “/system/lib/modules”)
• ExFAT sdcard support
• Stweak App support
• Disabled Wifi multicast for less battery drain
• Tweaked Ondemand CPU Governor for better performance/power balance
• Enabled available stock CPU governors (conservative, powersave,interactive)

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 on the computer.
2) Enable USB Debugging Mode.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S4 I9500 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The Adam Kernel file works only on Samsung Galaxy S4 I9500 running on Android 4.2.2 Jelly Bean firmware. Applying these on any incorrect variant will brick the device.

File Required
1. Adam Kernel for Samsung Galaxy S4 I9500 (GT-I9500_AdamKernel.V1.2.Odin.tar)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 by Installing Adam Kernel
Step 1: Extract Odin3_v3.07.rar file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the GT-I9500_AdamKernel.V1.2.Odin.tar file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully by installing Adam Kernel. You may now install any app that requires root permission.

[Note: You can also installing CWM version - GT-I9500_AdamKernel.V1.2.CWM.zip directly from your phone through CWM Recovery]

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Thanks for Read How to Root Galaxy S4 I9500 by Installing Adam Kernel Article

How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.2 XXDMD1 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.2 XXDMD1 Jelly Bean Firmware

Samsung Galaxy Tab 2 10.1 GT-P5100 users in Southeast Asia countries can now download and install the latest official Jelly Bean firmware, Android 4.1.2 XXDMD1, through Samsung KIES as well as via Over-The-Air (OTA) update.

Samsung Galaxy Tab 2 10.1 P5100 users who have already updated their devices with Android 4.1.2 XXDMD1 Jelly Bean firmware, may root their devices using the tutorial below.

Below are two methods to root the Galaxy Tab 2 10.1 P5100:  One is using CF-Auto-Root file and the other one is using PhilZ Touch Recovery and SuperSU files which can be installed via Odin.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Tab 2 10.1 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root, PhilZ Touch Recovery, and SuperSU files works only on Samsung Galaxy Tab 2 10.1 P5100. Applying these on any incorrect variant will brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

METHOD 1 - Root Galaxy Tab 2 10.1 P5100 by Installing CF-Auto-Root

File Required
1. CF-Auto-Root for Galaxy Tab 2 10.1 P5100  (CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.zip)
2. Odin 3.07

Steps to Root Galaxy Tab 2 10.1 P5100 by Installing CF-Auto-Root
Step 1: Extract downloaded CF-Auto-Root zip file and you will find a .tar.md5 file within it.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will arrive, then press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 7: Select these files in Odin at respective buttons:

• Click the PDA Button, and select CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9 Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the flashing process.
Step 10: Once flashing completed, your tablet will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Your Samsung Galaxy Tab 2 10.1 P5100 running on Android 4.1.2 XXDMD1 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

This method was originally posted via XDA-Developers original thread.

METHOD 2 - Root Galaxy Tab 2 10.1 P5100 by Installing SuperSU via PhilZ Touch Recovery

File Required
1. PhilZ Touch Recovery for Galaxy Tab 2 10.1 P5100 (philz_touch_5.03.7-p5100.tar.md5)
2. UPDATE-SuperSU-v1.25.zip
3. Odin 3.07

Steps to Install PhilZ Touch Recovery on Samsung Galaxy Tab 2 10.1 P5100
Step 1: Extract Odin3_v3.07.rar file using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy UPDATE-SuperSU-v1.25.zip file to external SD card of tablet.
Step 3: Switch off the Galaxy Tab 2 10.1 . Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together. A warning screen will arrive, then press Volume Up button to enter into Download Mode.
Step 4: Run Odin on your computer.
Step 5: Connect the tablet to the computer using the USB cable while the device is in the Download Mode. A message saying Added will arrive under Odin's message box in the bottom left. You will also get to see COM port with a number in Yellow when the tablet is connected to the computer successfully.
Step 6: In Odin, click the PDA and select the philz_touch_5.03.7-p5100.tar.md5 file. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once installation is completed, the tablet will reboot automatically. After the home screen appears, unplug USB cable from the tablet to disconnect it from the computer.

Steps to Root Galaxy Tab 2 10.1 P5100 by Installing SuperSU via PhilZ Touch Recovery
Step 9: Reboot the Galaxy Tab 2 10.1 into Recovery Mode by pressing and holding the Volume Up and Power buttons together.
Step 10: Now select install zip from sdcard, select choose zip from external sdcard and then navigate to the UPDATE-SuperSU-v1.25.zip file. Select and confirm installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select reboot system now to reboot tablet.

The Samsung Galaxy Tab 2 10.1 P5100 running on Android 4.1.2 XXDMD1 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 2 10.1 P5100 with Android 4.1.2 XXDMD1 Jelly Bean firmware.

Thanks for Read How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.2 XXDMD1 Jelly Bean Firmware Article

How to Root Galaxy S4 I9505 (Snapdragon) on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 I9505 (Snapdragon) on Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 I9505 (Snapdragon) users who have already updated their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 I9505 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The CF-Auto-Root file works only on Samsung Galaxy S4 I9505 (Snapdragon). Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 (Snapdragon) running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy S4 I9505 (Snapdragon) on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy S4 (Sprint) SPH-L720 on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 (Sprint) SPH-L720 on Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 (Sprint) SPH-L720 users who have already installed their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the phone is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S4 (Sprint) SPH-L720. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (Sprint) SPH-L720 (CF-Auto-Root-jfltespr-jfltespr-sphl720.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (Sprint) SPH-L720 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (Sprint) SPH-L720 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy S4 (Sprint) SPH-L720 with Android 4.2.2 VPUAMDL Jelly Bean official firmware.

Thanks for Read How to Root Galaxy S4 (Sprint) SPH-L720 on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy S4 I9500 (Exynos) on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 I9500 (Exynos) on Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 I9500 (Exynos) users who have already updated their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 I9500 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S4 I9500 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9500. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9500 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 (Exynos) running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy S4 I9500 (Exynos) on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy S4 (T-Mobile) SGH-M919 on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 (T-Mobile) SGH-M919 on Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 (T-Mobile) SGH-M919 users who have already installed their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the phone is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S4 (T-Mobile) SGH-M919. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (T-Mobile) SGH-M919 (CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (T-Mobile) SGH-M919 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (T-Mobile) SGH-M919 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy S4 (T-Mobile) SGH-M919 on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy S2 I9100 on Android 4.1.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S2 I9100 on Android 4.1.2 Jelly Bean Firmware

Samsung recently started rolling out its official Android 4.1.2 Jelly Bean firmware update for the Samsung Galaxy S2 bearing model number GT-I9100 in several countries. The new official firmware is now available for download through Samsung KIES as well as Over-The-Air (OTA) update.

Samsung Galaxy S2 I9100 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S2 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S2 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The Root Kernel file works only on Samsung Galaxy S2 I9100 running on Android 4.1.2 Jelly Bean firmware. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S2 by navigating to Settings >> About Phone.

File Required
1. Root Kernel for Galaxy S2 I9100: Siyah-s2-v6.0b4.tar or Siyah-s2-v6.0b5.tar
2. Odin 3.07

Steps to Root Galaxy S2 I9100 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S2. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the Root Kernel file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S2 I9100 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers.

Thanks for Read How to Root Galaxy S2 I9100 on Android 4.1.2 Jelly Bean Firmware Article

How to Root Nexus 4 on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Nexus 4 on Android 4.2.2 Jelly Bean Firmware

Nexus 4 (codename: Mako) is Google's fourth Nexus-branded Android smartphone. The phone was designed with and manufactured by LG Electronics.

Nexus 4 users who have already installed their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Nexus 4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone.
3. The Nexus 4 should be factory unlocked and not locked to any particular carrier.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The CF-Auto-Root file works only on Nexus 4. Applying this on any incorrect variant will brick the device. Verify the model number of the Nexus 4 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. CF-Auto-Root for Nexus 4 (CF-Auto-Root-mako-occam-nexus4.zip)

Steps to Root Nexus 4 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract CF-Auto-Root file using winrar/7zip/winzip or any other extracting tool.
Step 3: Switch off the Nexus 4. Then boot the device into fastboot mode by pressing and holding Vol Up + Vol Down + Power buttons together.
Step 4: Connect the Nexus 4 to the computer using USB cable, then wait until Windows finished installing the drivers.
Step 5: Navigate to the folder where you extracted the CF-Auto-Root files, then run the following command:

• Windows: Run root-windows.bat
• Linux: chmod +x root-linux.sh, Run root-linux.sh
• Mac OS X: chmod +x root-mac.sh, Run root-mac.sh

Step 6: Follow the on-screen instructions. Once the rooting procedure completes, the phone will boot into normal mode. You can now unplug the USB cable to disconnect your device from computer.

Nexus 4 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. Open the app drawer of the Nexus 4 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Thanks for Read How to Root Nexus 4 on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy S4 (Canadian) SGH-I337M on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S4 (Canadian) SGH-I337M on Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 (Canadian) SGH-I337M users who have already installed their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the phone is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S4 (Canadian) SGH-I337M. Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Galaxy S4 (Canadian) SGH-I337M on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy Chat B5330/B/L on Android 4.1.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Chat B5330/B/L on Android 4.1.2 Jelly Bean Firmware

Recognised XDA Developers, Chainfire recently released CF-Auto-Root file for variants of Samsung Galaxy Chat bearing model number GT-B5330/B/L.

CF-Auto-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. In essence, it does nothing but install and enable SuperSU on your system, so apps can gain root access. Head over to the CF-Auto-Root main thread to learn more about the root method.

Samsung Galaxy Chat B5330/B/L users who have already installed their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Chat on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Chat should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Chat B5330/B/L. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Chat by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Chat GT-B5330 (CF-Auto-Root-zanin-zaninxx-gtb5330.zip), GT-B5330B (CF-Auto-Root-zanin-zaninvj-gtb5330b.zip), or GT-B5330L (CF-Auto-Root-zanin-zaninub-gtb5330l.zip)
2. Odin 3.07

Steps to Root Galaxy Chat B5330/B/L Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Chat. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Chat to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root with .tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Chat B5330/B/L running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks for Read How to Root Galaxy Chat B5330/B/L on Android 4.1.2 Jelly Bean Firmware Article

How to Root Galaxy S3 (Sprint) SPH-L710 on Android 4.1.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S3 (Sprint) SPH-L710 on Android 4.1.2 Jelly Bean Firmware

Samsung has released its latest official Android 4.1.2 Jelly Bean firmware update for Sprint subscribers of Galaxy S3 with model number SPH-L710. The firmware is now available as Over-The-Air (OTA) update for the users.

Samsung Galaxy S3 (Sprint) SPH-L710 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the tablet is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 (Sprint) SPH-L710 (CF-Auto-Root-d2spr-d2spr-sphl710.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (Sprint) SPH-L710 Running on Android 4.1.2 Jelly Bean
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (Sprint) SPH-L710 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy S3 (Sprint) SPH-L710 with Android 4.1.2 VPBMD4 Jelly Bean official firmware.

Thanks for Read How to Root Galaxy S3 (Sprint) SPH-L710 on Android 4.1.2 Jelly Bean Firmware Article

How to Root Galaxy S3 (T-Mobile) SGH-T999 on Android 4.1.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy S3 (T-Mobile) SGH-T999 on Android 4.1.2 Jelly Bean Firmware

Samsung has finally started rolling out the Android 4.1.2 Jelly Bean firmware update for the T-Mobile variant of the Samsung Galaxy S3 with the model number SGH-T999. Users of the T-Mobile Galaxy S3 can officially update their device through Samsung Kies or by using Over-The-Air (OTA) updates.

Samsung Galaxy S3 (T-Mobile) SGH-T999 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S3 on the computer.
2) Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3) Make a backup of all your important data before following the guide.
4) Ensure the battery of the phone is charged more than 80 per cent.
5) The CF-Auto-Root file works only on Samsung Galaxy S3 (T-Mobile) SGH-T999. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 (T-Mobile) SGH-T999 (CF-Auto-Root-d2tmo-d2tmo-sght999.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (T-Mobile) SGH-T999 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2tmo-d2tmo-sght999.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 (T-Mobile) SGH-T999 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy S3 (T-Mobile) SGH-T999 with Android 4.1.2 UVDMD5 Jelly Bean official firmware.

Thanks for Read How to Root Galaxy S3 (T-Mobile) SGH-T999 on Android 4.1.2 Jelly Bean Firmware Article

How to Root Nexus 7 on Android 4.2.2 Jelly Bean Firmware

Are You Looking For How to Root Nexus 7 on Android 4.2.2 Jelly Bean Firmware

The Nexus 7 is a tablet computer developed by Google in conjunction with Asus. It is the first tablet in the Google Nexus series of consumer devices using the Android operating system and built by an original equipment manufacturer partner.

Nexus 7 users who have already installed their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Nexus 7 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone.
3. The Nexus 7 should be factory unlocked and not locked to any particular carrier.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The CF-Auto-Root file works only on Nexus 7. Applying this on any incorrect variant might brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. CF-Auto-Root for Nexus 7 (Wi-Fi) or CF-Auto-Root for Nexus 7 (3G)

Steps to Root Nexus 7 on Android 4.2.2 Jelly Bean Firmware
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract CF-Auto-Root file using winrar/7zip/winzip or any other extracting tool.
Step 3: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Vol Up + Vol Down + Power buttons together.
Step 4: Connect the Nexus 7 to the computer using USB cable, then wait until Windows finished installing the drivers.
Step 5: Navigate to the folder where you extracted the CF-Auto-Root files, then run the following command:

• Windows: Run root-windows.bat
• Linux: chmod +x root-linux.sh, Run root-linux.sh
• Mac OS X: chmod +x root-mac.sh, Run root-mac.sh

Step 6: Follow the on-screen instructions. Once the rooting procedure completes, the phone will boot into normal mode. You can now unplug the USB cable to disconnect your device from computer.

Nexus 7 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Thanks for Read How to Root Nexus 7 on Android 4.2.2 Jelly Bean Firmware Article

How to Root Galaxy Note 10.1 N8000 on Android 4.1.2 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Note 10.1 N8000 on Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Note 10.1 N8000 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 10.1 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 10.1 N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Note 10.1 N8000 (CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.zip)
2. Odin 3.07

Steps to Root Galaxy Note 10.1 N8000 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Note 10.1. Then boot the device into Download Mode by pressing and holding Volume Down + Power buttons together until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 10.1 N8000 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Thanks for Read How to Root Galaxy Note 10.1 N8000 on Android 4.1.2 Jelly Bean Firmware Article