How to Update Galaxy Note N7000 with Android 4.1.2 XXLT9 Jelly Bean Official Firmware

Are You Looking For How to Update Galaxy Note N7000 with Android 4.1.2 XXLT9 Jelly Bean Official Firmware

United Kingdom / Ireland owners of Samsung Galaxy Note (GT-N7000) have received a new firmware update based on Android 4.1.2 Jelly Bean with firmware build number N7000XXLT9. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N7000XXLT9
CSC: N7000OXXLT3
MODEM: N7000XXLT3
Version: Android 4.1.2
Built date: Jun 4, 2013
Regions: United Kingdom / Ireland

Samsung Galaxy Note N7000 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XXLT9 Jelly Bean firmware is compatible only with Samsung Galaxy Note N7000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 XXLT9 Jelly Bean Firmware for Samsung Galaxy Note N7000
2. Odin 3.07

Steps to Update Galaxy Note N7000 with Android 4.1.2 XXLT9 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted N7000XXLT9 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with 'modem' in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with 'csc' in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note N7000 should be now updated with official Android 4.1.2 XXLT9 Jelly Bean firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note N7000 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note N7000 running on Android 4.1.2 XXLT9 Jelly Bean firmware.

Thanks for Read How to Update Galaxy Note N7000 with Android 4.1.2 XXLT9 Jelly Bean Official Firmware Article

How to Root Galaxy Note N7000 on Android 4.1.2 XXLT9 Jelly Bean Firmware

Are You Looking For How to Root Galaxy Note N7000 on Android 4.1.2 XXLT9 Jelly Bean Firmware

United Kingdom / Ireland owners of the Samsung Galaxy Note (GT-N7000) has started receiving its latest Android 4.1.2 Jelly Bean update with firmware build number N7000XXLT9. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Note N7000 users who have already updated their devices with Android 4.1.2 XXLT9 Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XXLT9 Jelly Bean firmware is compatible only with Samsung Galaxy Note N7000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note by navigating to Settings >> About Phone.

METHOD 1 - Root via Stock Recovery
File Required
1. PhilZ-cwm6-XXLT9-ORA-5.08.5-signed.zip

Steps to Root Galaxy Note N7000 Running on Android 4.1.2 XXLT9 Jelly Bean using Stock Recovery
Step 1: Connect the Galaxy Note to the computer using USB cable.
Step 2: Copy the PhilZ-cwm6-XXLT9-ORA-5.08.5-signed.zip file to external SD card of your phone.
Step 3: Once the file transfer process is completed, switch off the phone and disconnect it from computer.
Step 4: Boot the device into stock recovery by pressing and holding Volume Up, Home, and Power buttons together.
Note: In recovery mode use the Volume keys to toggle between options and Home/Power button to select the desired option.
Step 5: Select apply update from external storage then navigate to the PhilZ-cwm6-XXLT9-ORA-5.08.5-signed.zip which was earlier copied to the SD card and confirm the installation.
Step 6: Once installation process is completed, return to main recovery menu and select Reboot System Now.

Samsung Galaxy Note N7000 should be now rooted successfully on Android 4.1.2 XXLT9 Jelly Bean through stock recovery.

METHOD 2 - Root via Odin
File Required
1. PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5
2. Odin 3.07

Steps to Root Galaxy Note 2 N7100 Running on Android 4.1.2 XXLT9 Jelly Bean using Odin
Step 1: Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Note. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note N7000 running on official Android 4.1.2 XXLT9 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Note N7000 with official Android 4.1.2 XXLT9 Jelly Bean firmware.

Thanks for Read How to Root Galaxy Note N7000 on Android 4.1.2 XXLT9 Jelly Bean Firmware Article